Products

Filtra­tion, already upfront of your process!

Our intake air filter systems provide ideal protec­tion for your product and your employees.
To control the instal­la­tion of the filter cell and provide addi­tional safety, the intake air filter system has a device to sepa­rately test the correct posi­tion of the filter cell’s gasket.

The safe-change system allows a filter change without breaking the containment.

Further­more, we use the clean­room as an addi­tional protec­tion barrier because our intake air filter system can be installed inside of them due to it’s GMP-compliant design.

Our phar­ma­ceu­tical docu­men­ta­tion allows an effort­less qual­i­fi­ca­tion of our filter systems.

Do you need high-purity process air, or do you want to protect the envi­ron­ment during an hazard or the cleaning of your process equip­ment such as tablet presses or capsule filler?

In both cases our intake air filter systems provide a solu­tion. They are avail­able as two-level versions in HEPA and ULPA filter classes.

New stan­dards in ergonomics:
Our clamping devices guar­an­tees a highly easy and safe filter change.
In addi­tion, we fulfill your needs of set-up style and connec­tion dimensions.
Versions with set-up legs are possible, as well as filter systems that can be inte­grated into the pipework. The size of the filter cell is suiting the required volume flow.

All our filter systems are made of high-quality stain­less steel and are GMP compliant designed.

Do you need a filter system for low dust loads as they are needed for instance in labo­ra­tory or pack­aging sectors?
Then, our labo­ra­tory dedusting systems is the optimal solu­tion for you!

This type of filter system saves dust directly in a filter cell without using a sepa­rate dust discharge.
Compared to the use of filter systems with dedusting or pre-sepa­ra­tion, our labo­ra­tory dedusting systems imply economic advan­tages as well as the best way of explo­sion protec­tion – the devel­op­ment of dangerous explo­sive atmos­phere inside the system is not possible!

Our basic version of the labo­ra­tory system is qual­i­fied for dust until OEB4. The basic package includes an (inte­grated) venti­lator with frequency converter, a whole control of all filter steps as well as a signal exchange for poten­tial-free contacts.

For more demanding appli­ca­tions in high-contain­ment areas, more extras can be added to the labo­ra­tory, for example WIP nozzles for the filter change or signal exchanger via ProfiBUS or ProfiNET.

Of course, other options as a mobile version or the exten­sion of the docu­men­ta­tion on our stan­dard for the phar­ma­ceu­tical industry are possible, too.

All types of the labo­ra­tory systems are GMP compliant designed. Besides that, we propor­tion the geom­etry of our systems to your needs of minimal measure­ments to offer optimal ergonomics during the filter change.
That’s the reason why our filter systems can be installed in a cleanroom.
You can benefit from the addi­tional protec­tion given by these clean­rooms. Never again needing an expen­sive decon­t­a­m­i­na­tion of tech­nique areas.

Vesch Tech­nolo­gies focuses on the indi­vidual imple­men­ta­tion of the filter systems regarding to your wishes.
Do you have more demands according to design or function?
Contact us – we are looking forward real­izing a project together with you!

Do you need a little volume flow under 1350m³/h but the ordi­nary solu­tions of indus­trial vacuum cleaners do not guar­antee enough process reli­a­bility for you?

If yes, our compact dedusting systems are a high-quality alter­na­tive for you!

This filter system is suit­able for inflam­mable dust as well as for OEB5 substances.

Our inno­v­a­tive system does not need a glovebox or an isolator and there­fore convinces by an easy handling.
Our compact dedusting system includes a frequency-controlled venti­lator as well as a control system.
It moni­tors the smooth oper­a­tions of the venti­lator, all filter stages and the fill level of dust discharge of the mechan­ical pre-separation.
Addi­tion­ally, a moni­toring of the filter instal­la­tion and the control of the damper posi­tion are possible.

The compact dedusting system has a safe-change process for a safe and ergonomic exchange of cassettes.

Regarding all our filter systems, we focus on a first and second explo­sion protec­tion by preventing an explo­sive atmos­phere as well as effec­tive igni­tion sources. So, they are usable inde­pen­dently for typical crit­ical explo­sion parameters.

All versions are GMP compliant designed and have minimal measure­ments. Conse­quently, our filter systems are perfectly made to be installed in a cleanroom.
You can benefit from the addi­tional protec­tion given by these clean­rooms. Never again needing an expen­sive decon­t­a­m­i­na­tion of tech­nique areas.

The mobile version enables its use at different produc­tion lines in different cleanrooms.

In addi­tion, a high-quality stain­less steel housing includes all compo­nents. Within the legal bound­aries the air can be released directly into the clean room by air recir­cu­la­tion oper­a­tion. As a result, a compli­cated tech­nical connec­tion on the HVAC-system is avoided.

Vesch Tech­nolo­gies focuses on the indi­vidual imple­men­ta­tion of the filter systems regarding to your wishes.

Do you have more demands according to design or function?
Contact us – we are looking forward real­izing a project together with you!